Controls for OEM machine builders
Keep Your Engineers Focused Where They Add the Most Value
Electrical design, UL 508A control panels, PLC/HMI software, motion systems, and machine integration, engineered around your product and its production requirements.
From one difficult controls issue to the complete controls scope through commissioning. Your machine and engineering direction remain yours.
- Focused technical support
- Defined controls workstreams
- Complete controls execution
01 / Recognizable challenges
Four Pressures on an OEM Engineering Team
Even experienced teams spend valuable time on demands that compete with machine development, customer requirements, and delivery.
Keeping Controls Current
PLCs, motion, networking, and embedded technologies are constantly changing. Practical experience helps identify solutions that are compatible, reliable, and supportable throughout the machine's lifecycle, not simply the newest products.
Protecting Engineering Attention
Programming, troubleshooting, panel coordination, and legacy support compete with the work only your engineers know how to do.
Absorbing Project Changes
Mechanical changes, availability problems, and integration surprises often converge near a committed ship date. Additional capacity gives you options.
Resolving the Seams
Supposedly compatible components, firmware differences, and vendor handoffs can consume hours before anyone can even begin resolving the underlying issue.
02 / Practical Advantage
Real-World Integration Experience.Less Friction for Your Team.
There is a difference between knowing how a component is supposed to work and knowing what it does when it is installed on a real machine.
Our toolbox includes proven architectures, familiar component combinations, known limitations, and practical workarounds. We prefer approaches we know we can support and evaluate exceptions when the application justifies them.
Our long-standing direct manufacturer relationships also help us reach the right technical people when documentation and first-tier support are not enough.
How the Benefit Is Created
- Start With Proven SolutionsAvoid repeating technology evaluations and integration experiments that have already been performed.Engineering payoff: Spend less time evaluating familiar component choices and more time addressing the machine's unique requirements.
- Take Responsibility for the Technical IssueInvestigate behavior, test alternatives, and coordinate vendor or manufacturer escalation within scope.Execution payoff: one assigned team follows the issue through testing, alternatives, and escalation rather than passing it around.
- Give Your Engineers Their Attention BackReduce time spent moving between component vendors and support layers.Business payoff: reserve internal engineering attention for machine development, customer requirements, and delivery.
Our experience extends beyond the panel. We consider how controls behave on the complete machine, including diagnostics, recovery, safety interfaces, maintainability, and support after delivery.
Have an integration or controls issue taking time away from your engineers? We can discuss a focused solution or a broader project.
Talk to an Engineer03 / Working with your engineers
Your Machine. Your Engineering Direction.
Your team understands the application, the customers, and the machine's design history. We contribute controls expertise and execution capacity to support the direction you establish.
Some customers want architecture input; others have established standards and need reliable execution. We agree on responsibilities, interfaces, and approval points before work begins.
We will raise concerns involving safety, reliability, compatibility, or lifecycle support and explain our reasoning. The goal is a stronger engineering organization, not a competing authority.
Owns the Machine
- Product and application requirements
- Customer relationship and objectives
- Retained design decisions and approvals
Owns the Agreed Controls Work
- Defined engineering deliverables
- Assigned fabrication and integration
- Testing, documentation, and support in scope
04 / You choose the level of support
One Problem. One Workstream. Or the Complete Controls Scope.
There is no required progression. Start with the work your team wants help with.
Solve a Specific Problem
Bring us a controls, motion, programming, networking, or component issue while your engineers manage the larger machine project.
- Troubleshooting and escalation
- Platform and component guidance
- Defined engineering assistance
Delegate a Clear Package
Give AS responsibility for a bounded controls deliverable with agreed interfaces and review points.
- Electrical design and UL 508A panels
- PLC/HMI or motion programming
- Integration and commissioning
One Accountable Controls Team
Put the complete agreed controls scope under one coordinated responsibility, from early technical discussions through commissioning.
- Architecture, design, fabrication
- Software, motion, and machine integration
- Testing, documentation, lifecycle support
You choose what stays internal. Our role can expand only as far as makes sense for the machine, the project, and your engineering team.
Discuss your scope ↗05 / Complete controls execution
One Coordinated Process: From Design Through Startup
When design, panel fabrication, software, and commissioning are separate contracts, the OEM often manages the gaps. When AS takes responsibility for the agreed controls scope, we coordinate those interfaces so your engineers can stay focused on the machine.
- 01
Define
Requirements, machine interfaces, constraints, and safety basis.
Clear decisions before design. - 02
Architect
Controller, motion, I/O, HMI, networking, and component choices.
A coherent, supportable system. - 03
Design & Build
Electrical drawings, hardware integration, and UL 508A panels.
Fewer design-to-build handoffs. - 04
Program & Integrate
PLC/HMI, motion, communications, diagnostics, and sequences.
Coordinated machine behavior. - 05
Test & Commission
I/O, faults, interlocks, sequences, startup, and agreed validation.
Issues resolved within scope. - 06
Document & Support
Released drawings, source/configuration deliverables, and support.
Serviceability after delivery.
Safety and compliance: UL 508A governs industrial control panel construction; NFPA 79 addresses electrical equipment of industrial machinery more broadly. A listed panel alone does not establish compliance of the complete machine. Safety requirements and validation responsibilities are defined for the project.
06 / Engineering judgment
Technology That Fits the Machine, Not Just the Specification Sheet
We favor proven, serviceable solutions and evaluate new approaches when they offer a meaningful application advantage. Our primary controls ecosystems are Mitsubishi and CODESYS, including industrially focused Raspberry Pi-based controls.
Our platform selection considers performance, safety, environment, availability, lifecycle, maintenance, and total system cost, not novelty alone.
Explore Raspberry Pi-based controls →ENGINEERING DECISION
Fit the machine. Support the lifecycle.Industrial PLC
Suitable for many long-life platforms with familiar maintenance and industrial support.
CODESYS
Flexible controller, visualization, communications, and hardware options where appropriate.
Industrial SBC
Raspberry Pi-based and related approaches when the environment and lifecycle justify them.
Specialized Controls
Application-specific hardware where volume, functionality, and support economics warrant evaluation.
Engineering Selection Criteria
We evaluate the functions the machine must perform, the control response it requires, and the applicable safety requirements. The architecture must support both normal operation and the necessary validation activities.
Proven configurations, operating conditions, known failure modes, and component suitability matter more than theoretical capability. We favor predictable behavior in the actual machine environment.
Production plans and field support depend on access to components. We consider sourcing, replacement options, and potential supply constraints before recommending hardware.
Expected machine life affects controller selection, software support, component continuity, and replacement planning. The architecture must remain practical beyond initial commissioning.
Useful diagnostics, accessible documentation, maintainable software, and practical replacement procedures help customers support machines long after delivery.
Your established controls platforms, engineering practices, customer specifications, and approval requirements shape our recommendations. We work within the agreed design authority.
07 / Evidence from real equipment
Engineering Decisions That Make Real Machines Work
What matters is what your team can accomplish with specialized controls experience behind it. These projects illustrate how practical engineering decisions have supported real OEM machines.
Control Architecture / OEM Machine Platform
Bore Welder Controls Modernization
AS replaced an aging PLC arrangement with compact Raspberry Pi-based machine controls, integrating the operator interface and simplifying the controls package for a repeat OEM product.
- Architecture: compact controller and integrated visualization.
- Machine impact: reduced wiring complexity and a revised controls platform.
- Published reach: more than 3,500 machines across 28 countries.
Read the Technical Details
Architecture decision: Replace the aging PLC arrangement with compact, centralized Raspberry Pi-based machine controls and an integrated HMI. The project addressed the controller, operator interface, and wiring as a connected OEM platform.
Repeat-product application: The architecture was applied to an established bore welder product, rather than a one-off retrofit. AS's published project summary reports more than 3,500 machines across 28 countries.
Why it matters: The OEM could update a repeatable controls package rather than continue supporting an obsolete PLC approach.
Discuss a similar controls platformMotion & Communications / Test Equipment
EMI Testing Turntable Controller
For established test equipment using legacy GPIB-based actuators, AS developed a rack-mounted controller to connect modern Ethernet test instruments with precise servo positioning.
- Interface: Ethernet commands translated into motion control.
- Integration: automated sequencing and positioning.
- OEM benefit: existing test systems retained.
Read the Technical Details
Interface constraint: Existing GPIB-based actuator equipment needed to work with modern Ethernet-connected test instruments.
Controls solution: AS developed a rack-mounted controller to interpret Ethernet commands and drive accurate servo positioning, including automated motion sequences.
Why it matters: The manufacturer could modernize control and communication while retaining its established testing equipment and workflows.
Discuss a similar motion integrationCOLLABORATION / RELATIONSHIP PROOF
From Technical Support to Broader Controls Responsibility
- 01 Components and technical support
- 02 A difficult controls question
- 03 Customer-requested programming help
- 04 Broader controls responsibility
A Relationship That Grew One Problem at a Time
In one longstanding OEM relationship, AS began by supplying components and answering technical questions. The customer's engineer later requested programming help and ultimately chose to delegate the controls work to AS.
That change was initiated by the customer. The OEM retained ownership of its machines while gaining a reliable way to allocate controls responsibility.
The organizational benefit: useful technical support developed into a capability the customer's engineering organization could draw on whenever needed.
08 / From first discussion to delivery
A Straightforward Way to Work Together
The process fits the size of the work, from a single technical issue to an entire controls package.
Understand the Machine
Discuss requirements, constraints, existing controls, and the responsibilities your team wants to retain; starting with a paid technical assessment, as needed.
Agree on the Scope
Define deliverables, interfaces, engineering approvals, technical approach, schedule assumptions, and commercial expectations.
Execute and Verify
Complete the assigned work, communicate emerging risks, test against agreed requirements, and provide an appropriate handoff.
- Take on demanding projects
- Reduce coordination burden
- Respond to changes
- Build supportable machines
09 / Common questions
What OEM Engineering Teams Ask Us
Can we retain our engineering standards and design authority?
Yes. We begin with your requirements and preferred working methods, then agree on technical responsibilities and approvals. We raise material safety, reliability, or lifecycle concerns constructively rather than changing a design merely because it differs from our preference.
Can you work with our existing PLC platform?
We first assess the platform and project requirements. Our preferred ecosystems are Mitsubishi and CODESYS. Support for other platforms is evaluated individually, and we will say so when the work is outside our capabilities.
How do you handle machinery safety and compliance?
Safety requirements, risk assessment, design responsibilities, and validation are established for each project. UL 508A governs industrial control panels; NFPA 79 addresses electrical equipment of industrial machinery more broadly. A listed panel is not, on its own, a compliant complete machine.
What if we cannot define the project well enough to quote it?
We can begin with a requirements discussion. Where uncertainty is substantial, a paid survey or technical assessment may be the responsible first step before committing to a larger scope or schedule.
Can AS handle only one part of the project?
Yes. Focused troubleshooting, panel fabrication, electrical design, programming, motion integration, and complete controls execution are all possible engagements. The appropriate division of work is agreed project by project.
Who owns PLC source code and electrical documentation?
Deliverables, source access, configuration information, intellectual property, and any licensing conditions are defined in the project agreement. We emphasize released configurations and documentation that support long-term maintainability.
What happens when products do not work together as expected?
For issues within our scope, we investigate actual behavior, evaluate workarounds, and coordinate escalation. Our practical product experience and direct manufacturer relationships can reduce time spent navigating layers of support, although some issues require manufacturer or customer action.
Can AS Support Our Machines After Commissioning?
Yes. Our involvement can continue beyond initial commissioning. We provide controls troubleshooting, software updates, technical assistance, and ongoing engineering support within our capabilities. The appropriate support arrangements and response expectations are established for each project.
10 / Next step
Tell Us What You're Building, or What's Getting in the Way
Maybe you need one controls problem solved. Maybe your team wants to delegate a defined workstream. Or maybe you're looking for one accountable partner to carry the entire controls package.
You don't need to have every detail worked out before starting a conversation. We'll discuss your machine, what your team wants to own, and whether a technical assessment or defined scope makes sense.
Your Machine. Your Engineering Direction. Our Controls Capability Behind It.
START THE CONVERSATION
Let's Discuss Your Machine
Speak with an engineer about a technical issue, a new build, or a complete controls scope.
Talk to an Engineer ↗ Send Us Your Drawings →
